VCM DSP packet routing errors, invalid IP address

[teletechman]

I have errors on the monitor that I am trying to find out what they mean.
VCM DSP packet routing errors, invalid IP address 0x0a2b0501
TI VCM: DSP core corresponding to IP address 0x0a2b0501 not found
I am having some weird issues with an IPO R12.1 that I am searching for answers to. The system is set up to page all phones and it worked for a couple of hours then some of the phones stopped being able to be paged. Another is that the SCN site receives a call but only certain phone can talk to the client they can hear but not talk to them. Other can do both mix of a 1400 and j series phones. Then I was told they all could not talk to clients. the weird part is my cell number works every time at all locations. I am at a loss as I have never had this before, call between locations work fine. The trunks are SIP and going to the main site then across SCN to the other.
Mike

 

[FractalTelecom]

.

 

[Ekster]

VCM DSP packet routing errors, invalid IP address 10.43.5.1

TI VCM: DSP core corresponding to IP address 10.43.5.1 not found

Any help?

 

[teletechman]

No this is not part of the programming not sure where this IP address is coming from. I have checked over the programming for anything related to this IP address and found nothing. I will open a ticket with Avaya.
Mike