Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacant number ?

Status
Not open for further replies.

cablejerk

Technical User
Jun 21, 2006
11
AU
Hello All, we have a BC9 CALENDAR DATA
IDENTITY=XXXX-BC90REVB
VERSION=LZY2035106/1/53-CNI85-000003FF/R1A .
It seems we may have some data corruption. When one tries to ring 7770 the system says that it is vacant even though it is programmed as below

<SUDIP:DIR=7770;
DIRECTORY INFORMATION AT 14:12:46 21OCT08
DIRECTORY NUMBER : 7770
TYPE OF DIRECTORY NUMBER : DTS
NAME :

EXTENSION TERMINAL DATA
EQU TERMD ADN CALALT
2-1-52-00 0020 1

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST
14 02040415 02001201 001151000 0000 1 00000000010

DIGITAL EXTENSION FUNCTION KEY DATA
KEY KTYPE FCN VALUE DIG
00 PGM
01 FCN CAB
02 FCN CAD
03 FCN TNS A21A7299B
04 SKI F1
05 SKI F2
06 SKI F3
07 SKI F4
08 SKI MENU
09 ODN 7770
10 ODN 7770
11 ODN 7770
13 FCN TNS
14 MDN MDN 6858
15 MDN MNS 6040 6040
16 MDN MNS 6250 6250
17 MDN MNS 7299 7299
18 MDN MNS 6554 6554
19 FCN TNS
20 MDN MNS 6924 6924
21 FCN TNS
22 FCN MEW
23 FCN ODN2

EXTENSION MULTIPLE DIRECTORY NUMBER DATA
DIR KEY CALALT
*7770 11 1
6676 19 0
7299 21 1
6553 19 0
6619 15 0
7434 15 0

GROUP DATA
GROUP CALL PICKUP: 0065

DIVERSION DATA
INDIVIDUAL DIVERSION NUMBER: 7000

PAGING DATA

END
Nadap says 7770 is numtype ex, any ideas on where to look?
 
Usually caused by NA data corruption -caused by pulling numbers out of middle of EX range-i.e something like changing 7769 to Numtyp AC from Ex-if Dusyi not done do LADAI or put the programming back how it was
 
You can print NADAP:LIM=1; and compare to NADAP:LIM=2; and see if there is a discrepancy between the two regarding that portion of the number range.

It may seem labor intensive, but you should try to call 7770 from an extension in every other LIM in the system. This will help to verify if the corruption is in LIM 2 (likely if no other extensions can call 7770) or just one other LIM.

The data in the program unit (NAP if I recall correctly)is the same for every LIM in the system so you can copy the unit from LIM 1 (or a good LIM) into the LIM that is corrupted.

Good luck,

Dave Strang
 
I expect you are correct ceejay there is a lot gaps in the extn range here.Dusyi had occured the night previous.
Dave I had already changed the extn number and fowarded 7770 to that number as a stop gap measure, so to late to compare interlim nadap.I will try it next time though.After another day and another dump i changed programming back and now it works fine.
Thank you guys for your replies and sorry not to be able to give a difinitive answer as to whe core of the problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top