Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacant Number Routing SIP

Status
Not open for further replies.
dmath

dmath

Vendor
Jul 21, 2015
2
US
I have a CS1000 RLS 7.5 with System Manager and Session Manager 6.2 along with an Avaya (Sipera) SBC 6.2. I am trying to get my vacant numbers coming in on SIP to route to my RAN just like my DID's coming in on PRI's do. Any thoughts?
 
Sort by date Sort by votes
You need to modify INT_DATA in the CDB in LD 15 (print in 21). The prompt CTVN, the third response would need to be RAN and then provide your RAN route number. Obviously VNR needs to be turned off in NET_DATA.

For all intercept prompts, the four fields are the following sources: Telephone, Attendant, TIE, and DID


Matthew - Technical Support Engineer Sr.
 
Upvote 0 Downvote
Bingo......all I had to do was change the 3rd field to the RAN and it works. The SIP is built as TIE in the RDB.....thank you!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JM2009
  • Locked
  • Question
SIP Tie trunks betwwen two CS1000 1
Replies
1
Views
343
Firebird Scrambler
Firebird Scrambler
ashwincjoshi
  • Locked
  • Question
Issue with CDP Configuration on Nortel CS1000 - One Number Works, One Doesn't
Replies
1
Views
257
Firebird Scrambler
Firebird Scrambler
bltodd
  • Locked
  • Question
2050PC Avaya Nortel Softphone SIP-ALG
Replies
1
Views
141
phonebits
phonebits
phoneswitchnewbie
  • Locked
  • Question
Map extension to outgoing 800 number 1
Replies
6
Views
176
phoneswitchnewbie
phoneswitchnewbie
phonebunny
  • Locked
  • Question
How to build phone using a CDP'd number 1
Replies
4
Views
213
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top