Using Putty in place of ASA???

[Johnny3937]

Can can get logged into my switch using Putty with 513 emulation, but no matter what key configuration I use in SETTINGS it still won't let me use F7 or F8 to page up or down. Page up and Page down keys don't work either. Any ideas? Thanks!

 

[AvayaTier3]

Hardware platform? Definity / CM software version?

If sunt is a CM terminal type, your function keys will work with putty.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Stinney]

Try setting your port to 5022 and use W2KTT when prompted by the phone system when logging in.

You won't be able to use F keys but you can use Esc commands.

They should appear at the bottom of the screen when you execute a command, so you don't have to remember them.

But for example: Esc+n is next page, Esc+p is previous page, Esc-x is cancel, Esc-e is submit.

- Stinney

I love learning and passing on knowledge. "Because knowing is half the battle".... GI JOOOOOE!

 

[Stinney]

Sorry I mixed my symbols, it should be Esc- not Esc+, you press and release Esc then press the letter, not Esc + the letter at the same time.

You can also download TuTTy and use 513. It doesn't show you the F keys but they work.

Check out this video regarding PuTTy and TuTTY (start at 5 minutes).

http://www.youtube.com/watch?v=dWgTTF3fL28

- Stinney

I love learning and passing on knowledge. "Because knowing is half the battle".... GI JOOOOOE!

 

[Maxwell1001]

SUNT is the one yo want then all will work as normal