Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using one Callpilot to service two CS1000

Status
Not open for further replies.

terrysdavid

Programmer
Jun 6, 2006
350
TT
Hi,
Has anyone ever configured one Callpilot server (201i) to service two different CS1000Es? I have one location with a CS1000E HA (Rls 7.6) and a CallPilot 201i (callpilot 5). I have another CS1000E (Rls 7.6 co-resident)which belongs to the same CDP network. Many users are moving to this smaller location and may require voicemail.

Can someone give me some general advise? Thanks.

Terry
 
I just forward using an ACD NCFW to send the call to the other switches VM DN over SIP, had a problem where is would say the users at and give the full e164 number does not subscribe to this service. So just added CMDB to the outbound SIP from the first switch to alter the OCN to a CDP format then it just worked. Steering code for the return to get the Message Waiting to work but that is probably already there to allow dialing.
 
Thanks. I'll try that when I'm about to implement. I'm in the process of separating a voice network with 10 CS1000E into two separate companies...So I have to rebuild the systems because they now have different domain names. I try your suggestion with the voicemail.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top