using nortel system speed thru a tie line

[zoomaster]

I have a cs1000m connected to another switch B via digital tie line. I need to access the system speed list in cs1000m from telephone on switch B. On the cs1000m FFC is *71 using list 202.

I am thinking I have to dial into a disa trunk or a voice port in Callpilot then enter *71 and the speed call entry.

Does anybody have any ideas on how this can be done elegantly?

Thanks in advance

 

[Firebird Scrambler]

Are you able to dial the tie lines access code followed by the FFC code and entry number?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[zoomaster]

All is good now. Hit the books last night and found you can assign a pilot DN to the speed call list. LD 57 NEW PLDN