Using multiple Static IP's with 837 & 501

[RageMonkey]

Hi guys.

I have a few IP's from my ISP.
I was just wondering if it was possible with the 837 and 501 to use these to create a rule?

i.e.
If external destination static ip 82.xx.xx.xx.01 then 10.0.07 port 80 tcp
If external destination static ip 82.xx.xx.xx.02 then 10.0.10 port 80 tcp

Currently on the 501 I have the external address as the LAN between it and the 837. I.e. 192.168.4.1-2

I would appreciate any help or advice.

 

[Supergrrover]

Not really sure what you are trying to accomplish but take a look at policy nat -

http://www.cisco.com/en/US/products...ucts_tech_note09186a00800b6e1a.shtml#usingnat

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[RageMonkey]

Thanks for the reply
(Sorry for not getting back sooner, I was out of the office).

Thanks for the link it looks to be perfect.