Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using Linux's Telephony Power

Status
Not open for further replies.

teamzx

Technical User
Feb 16, 2003
5
US
I am in charge of setting up a reasonable network for a new
business and that also includes a phone system in addition
to Internet access. To cut costs I was thinking of using
Linux and a telephony card to create a Linux-based PBX
phone system using a few channels from a T1 line for voice
and the rest of course for Internet access. My question is,
using a simple Slackware distribution on a Linux gateway,
what is required to set up a successful telephony system
(hardware/software wise)?
 
This may be a bit off forum, but would I also be required to
get a commercial grade router to take care of the Internet
part of the T1 or can Linux do that too?

PS. Thanks thedaver, I will read over that site tonight when
I get some more time.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top