userenv 1000 error again :(

[marlowe4711]

Hello again..

First, thanks for your further help.

But I think I have to explain my Problem better.

I use a 2000 Server and two clients . On the server is a DNS server installed. The following error message is shown in the log of the server:

The error: 1000 Userenv. The domain Controller name for your network can´t be found.
Value(59)
This error is logged every 5.30 min in the protocol.


I hope you´ll be so nice and help me gain
cya

marlowe

 

[CitrixEngineer]

(From EventID.Net)

This may indicate a problem with the physical network (cables, fault NICs or hubs.


From a newsgroup post: "Do the following to ensure that the SRV records for the AD servers are in DNS properly (from the DOS prompt):
nslookup
set type=srv
_ldap._tcp.dc._msdcs.YOURDOMAIN.COM

You should see something like this:
_ldap._tcp.dc._msdcs.YOURDOMAIN.COM SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = server1.YOURDOMAIN.COM
_ldap._tcp.dc._msdcs.YOURDOMAIN.COM SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = server2.YOURDOMAIN.COM
server1.YOURDOMAIN.COM internet address = 1.1.1.2
server2.YOURDOMAIN.COM nternet address = 1.1.1.1

If you don''t then you definately have a DNS problem. I would also recommend running the dcdiag and netdiag utilities on your domain controllers. If you find that the servers aren''t in DNS, then make sure dynamic updates are enabled on your DNS server and restart the netlogon server on each of your DCs. CitrixEngineer@yahoo.co.uk

 

[mannion]

If you could copy the log entry into a text file and e-mail it to me I know someone who can help. My e-mail is mannion@whitecross.hereford.sch.uk

Like I said before I had this problem and it's real simple to fix just can't remember!! but I know a man who can but he'll want to see that peace of the log!!!

 

[Daviddtelf]

Ah ive seen this one, I bet u dont have file and print sharing enabled on your nic, Do it, this will clear the error.

Thanks