Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

User with no Aspect skills needs capture file help 1

Status
Not open for further replies.

wolf2blue

IS-IT--Management
Oct 3, 2005
28
US
Hi All, forgive me but I'm very new at this.
Here is what I am trying to do.

settings
V-100
direct-connect to com1 9600 8N1 no flow control

Capture all incoming data to a capture file real time or as close to real time as is possible.
I would like the capture file to be named ACDMMDDYYYYHHMM (ie April 13 2006 05:00 would create a file named ACD041320060500). We need to create a new capture
file at 5am and close the capture file at 7pm each day. Should the system or Procomm Plus be restarted between 5am and 7pm a new file needs to be created with the naming convention from above.

Thank you for taking the time.
Kurt
 
Thank for all your help. I'm still going to try to clean it up. Seems like there has to be a way to set it up with some global prams for the common things like capture on off times. I was thinking about something I read in another thread. There is a line with the command if iHour == 10. Not sure how to use it, start it or stop at the right times. But it looks like it might fit.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top