User BLF operation

[PRNDL2]

On a new IP500v2 Rel 6.0 (14) I have a DBM32 attached to a 1416 set. I've programmed User Blf buttons on the DMB and my question is when a station is off hook the red led associated blinks rapidly...is this correct? Seems it would be distracting to have many red leds flashing like that. Can't find a description on how user blf leds should operate.

Thanks in advance.

Jerry

 

[CarGoSki]

I remember not being able to find pretty little charts like this for the User button:

http://marketingtools.avaya.com/kno...ice/mergedProjects/1608/apperance_buttons.htm

 

[PRNDL2]

I know...I saw that chart but couldn't find anything on a user blf.

 

[CarGoSki]

Must have been an omission but what you described sounds correct otherwise known as "that is what it does so it must be true"

 

[Bas1234]

Just a Tip;

Don't label the "user buttons" for the 16xx/14xx
When you change a name you don't need to change all the buttons... And it is still showing the name from "Action Data"

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[PRNDL2]

CarGoSki...your right it must be true.

Thanks for the tip Bas1234.