Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use Extensions DID # when Twinning is on?

Status
Not open for further replies.

barkster

IS-IT--Management
Dec 31, 2003
67
US
Currently with our pri all outgoing calls show from our main number. Is there a way that when a user has twinning turned and someone calls there extension it displays their DID # instead of our main number? Thanks
 
Depends on the PRI carrier, and what they allow to be sent as outgoing CID. If they allow numbers other than the Main number to be sent, at least DIDs that are part of the circuit, and the DID ends with the extension number, you could create a new ARS table with N; / Dial3K1 / NS2223334E / PRI Line Group, and a Short Code like 8N / Dial / N / ARS for Twinning.

User would program their Twinning number with 8 and cell phone number instead of normal 9 and number, example is 3 digit extension numbers matching last 3 of the DID.
 
thank you, I am on 11.1. this may be a bit over my head but u have given me a starting point. appreciate the help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top