Hi,
I posted a similar post a long time ago, and it has got lost in the shuffle and I need to get this problem solved.
I installed a new USB 2.0 card in a friends computer. It installed fine and shows fine in the hardware list. Its a Dell Comp with Win2k, 256Mb Memory and a 800MHz Intel proc. When you plugg something in the new USB card it works fine UNTIL...... you reboot. While booting it bluescreens. If you unplug the device and reboot agian, it works fine. Anyone have any ideas what is wrong.
I got the error message on the blue screen. It is below:
STOP: 0x0000001E (0xC0000005, 0x8041FCF8, 0x00000000, 0x0000001D)
KMODE_EXCEPTION_NOT_HANDELED
ADDRESS 8041FCF* base@ 80400000 DATE STAMP 3d366686- ntoskrnl.exe
Also, we went and bought a different brand of a USB 2.0 card at Walmart and put it in there, loaded the drivers etc. Installed the printer, and did a test page, it worked, then rebooted and it blue screen with the message above. It does it with either card. Any ideas?
I posted a similar post a long time ago, and it has got lost in the shuffle and I need to get this problem solved.
I installed a new USB 2.0 card in a friends computer. It installed fine and shows fine in the hardware list. Its a Dell Comp with Win2k, 256Mb Memory and a 800MHz Intel proc. When you plugg something in the new USB card it works fine UNTIL...... you reboot. While booting it bluescreens. If you unplug the device and reboot agian, it works fine. Anyone have any ideas what is wrong.
I got the error message on the blue screen. It is below:
STOP: 0x0000001E (0xC0000005, 0x8041FCF8, 0x00000000, 0x0000001D)
KMODE_EXCEPTION_NOT_HANDELED
ADDRESS 8041FCF* base@ 80400000 DATE STAMP 3d366686- ntoskrnl.exe
Also, we went and bought a different brand of a USB 2.0 card at Walmart and put it in there, loaded the drivers etc. Installed the printer, and did a test page, it worked, then rebooted and it blue screen with the message above. It does it with either card. Any ideas?