Urgently need an answer please (old 616 easa phones) 1

[delphilord]

Is there any SMDR optin on old 616 series?
there is a port ,but I dont know whwere are port setting for SMDR

 

[cwc3]

cr+lf 1200 7 bits mark 1 stop bit 66 is default
i'dd go in thru the keypad and kick it up to
9600,n,8,1 if i was you

 

[delphilord]

Thank you CWC3.
whis code is for this settings?
I mean programming code.On some phones PGM[800] is for SMDR but what about this

 

[delphilord]

Sorry I want to ask about wiring too,is cable same as 1232 cable?

 

[cwc3]

use a modem cable with a null modem adapter

 

[delphilord]

I myself make my cables for some reasons.if you have pinouts (wiring) plesase tell me.Are this true?

PBX (25) PC (9)
1 gnd
2 2
3 3
4 7
5,6 4
7 5
20 1,6,8

 

[cwc3]

look in book pgm 27

 

[delphilord]

It is not my PBX ,It is for one of my cousumers and he lives in another city,we have more than 1000Km distance and he has not manual.
Just if you can give me pinouts It will be very very useful for me

 

[cwc3]

http://www.wedophones.com

the pinouts are in the book

 

[delphilord]

Thanks ,I have downloaded KXT616 manual and I found the wiring but its is 25 to 25 pin and

FG -> FG
TXD -> Rxd
Rxd -> Txd
CTS,DSR -> DTR
SG -> SG
DTR -> CTS,DSR,DCD

THEN no need 4->7 connecting
I will tell my coustumer to remove this and test again.
thanks again for your attention and repiles.

 

[delphilord]

Tested An OK
thanks cwc3