Urgent:Dump problem

[cuneyt2919]

Hi
The system is BC12SP5 and 9 lims..
The problem occured after adding new lims..(2 lims were added)
[tt]
<dubdp;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
NOT VALID NOT VALID
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 FAULTY FAULTY
2 FAULTY FAULTY
3 FAULTY FAULTY
4 FAULTY FAULTY
5 FAULTY FAULTY
6 FAULTY FAULTY
7 FAULTY FAULTY
8 FAULTY FAULTY
9 FAULTY FAULTY



[/tt]
When we give dusyi command,

<DUSYI;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 12:47 25OCT04
FAILED IN LIM008 AOM7

END

I give 2nd times the "DUSYI" command,
and this time it fails in AUM8

<DUSYI;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 12:51 25OCT04
FAILED IN LIM008 AUM8


And here is what i did:
<rfpuI:UNIT=aom8,LIM=8;
RFPUI:UNIT=AOM8,LIM=8;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
8 AOM8

EXECUTED

<rfpuI:UNIT=aom7,LIM=8;
RFPUI:UNIT=AOM7,LIM=8;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
8 AOM7

EXECUTED

<rfpuI:UNIT=aum8,LIM=8;
RFPUI:UNIT=AUM8,LIM=8;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
8 AUM8

EXECUTED

<dusyi;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE
BUFFER TRANSFER ERROR 12:57 25OCT04
FAILED IN LIM008 AOM7

<rfpuI:UNIT=drdh,LIM=1;
RFPUI:UNIT=DRDH,LIM=1;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 DRDH

EXECUTED

<dusyi;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 13:01 25OCT04
FAILED IN LIM008 AOM7

Does anybody help me about the issue?

Thank you very much for all your helps

 

[TRIDENT100]

There is only one way out of this. PC-Regn and INL

Someone make a misstake......


/Trident

 

[antek]

I have the same problem before with MD110 BC10 (12 LIM) and I am sure there is no way ,he should be start to make INL ,even if this problem solved this system will still unstable and will make restart from itself many times,so I think INL is the best way to ADD new LIM

 

[TRIDENT100]

It is OK to add a new LIM, but you must be careful where you put program units. If you know how to do it it is nor problem
Add and remove LIM is it not for newbeginners!!!

/Trident/

 

[cuneyt2919]

Hi all,
thanks for replies, adding or removing lim is our local Ericsson provider's issue.
So we will wait for INL again..

Rgrds.

 

[cuneyt2919]

Hi all,
Problem was fixed by Ericsson Local partner, by replacing LPU5 card on LIM9..
He told that no problem seemed on LED or any on that LPU.. But it's the reason for the problem.

Rgrds

 

[gtw666]

Unfortunately we always have this kind of problem here in Brazil in some pbx. The only solution is RFEXI, but in BC12 I think the system will ask for reload, so it's very dangerous if you don't have any valid dump on HDU.