Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading to MCD 6.0 from 4.2

Status
Not open for further replies.

kwbMitel

Technical User
Oct 11, 2005
11,503
0
36
CA
Database backup start 0:0:23
Backup complete 0:02:02
Upgrade starts 0:02:04
Upgrade complete 0:23:15
License options start 0:23:15
License complete 0:23:15
Restore start 0:23:15
Restore complete 0:29:02
Dbms save start 0:29:02
Reboot
Upgrade completed 38:00:06

Nice!

(Did i mention this was remote, 500km's away)

**********************************************
What's most important is that you realise ... There is no spoon.
 
Sorry that lst one should read 00:38:06

**********************************************
What's most important is that you realise ... There is no spoon.
 
That is pretty good what system was it? ISS, MiCD vMCD?

Share what you know - Learn what you don't
 
It was a CX-II

**********************************************
What's most important is that you realise ... There is no spoon.
 
Beautiful. In the next couple of months I get to do around 500 online upgrades from 9.0.3.34 to 10.0.4.24. Done about 30 so far, no major problems.
 
@ Lundah

My best process is to export the IP Telephones form prior to upgrade and compare In service Phones afterwards.

Also, when you take those systems above 4.0, make sure to get a backup after migration and before upgrade.

I've had a couple of systems fail at the Licensing and Options step and had to revert the whole thing to 4.0 to restore my backup.

Having a Post migration backup allows you to move forward.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Have you not used the 'SWAP' command to go back if you get a failure?

Share what you know - Learn what you don't
 
Swap wouldn't work because the licensing was messed up (or possibly due to Migration issues)

I had to reinstall 4.0
Restore from 4.0 backup
Migrate again
*** backup post migration
Attempt upgrade again (failed again at licensing)
cancel
Get TAC on the phone
Fix licensing issues (some dimensioning issue)
Restore migrated DB


**********************************************
What's most important is that you realise ... There is no spoon.
 
Yeah the migration is still a ways off, Last I heard, the boys in Kanata aren't even completely sure I can migrate a cluster the size of the one I'm dealing with without it all coming crashing down yet. One step at a time.
 
Whenever I migrate a cluster, I turn off sharing and upgrade 1 at a time, and then turn sharing back on.

I've never had more than 8 though.

500 is crazy

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top