Upgrading MGU

[wangmadeli]

Hi all

I'm trying to upgrade the MGU with the latest package, but there seems to be some error. I've copied the MGU rpm into the TS directory:

opt/jboss/server/default/deploy/jboss-web.deployer/ROOT.war/mgu/1.3.134

Then key in the command:

board_sw -gateway -netload -path mgu/1.3.134 -protocol http -host 172.16.5.50 -mgw 1a

It shows an error :

no server

Anyone have idea what is the problem?

Many thanks

 

[pupilas]

you should see the file error.log and access.log in server software for more information, and make sure the server service is running

sure it is a bug in the path

 

[himdp]

You are using the path which is created for eri_om. This web server will normally run on port 8080. If this is the case, you need to add a port 8080 parameter to you command string i.e.

board_sw -gateway -netload -path mgu/1.3.134 -protocol http -host 172.16.5.50 -port 080 -mgw 1a

 

[himdp]

Spotted a typo, that should of course be-
board_sw -gateway -netload -path mgu/1.3.134 -protocol http -host 172.16.5.50 -port 8080 -mgw 1a

 

[wangmadeli]

Hi all

I forgot about this problem awhile ago as i just used upgrade the MGU directly using a USB stick. I found out the problem for my above error.

For anyone facing this problem, i log in as root then into mdsh shell when typing the command for upgrade.

It returns "server not found"

However if i exit root , the command works fine without keying the parameter "-port 8080" as well. Just for sharing. =)

Thanks all