Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading customer from IP406 to IP 500v2 and using their old DS30's and Phone8's

Status
Not open for further replies.

tfisher7us

Programmer
Apr 11, 2011
94
US
Im upgrading a customer from an old 406v2 to IP500v2 and our sales person couldn't get them to buy new DS30's or Phone8's. Will the old white DS30's and Phone8's download the necessary files and upgrade straight to the ip 500v2 11.0.4? or do I need to do something else?
 
Just an update I found an old white DS16v2 and plugged it into the IP500v2 and it came up and got the correct software.
 
Here is a list.
External_Expansion_h8k1me.jpg
 
IP400 So8 worked all the way up to R8 I believe? Pretty sure I had an Alchemy one way past the supported version!

ACSS (SME)

 
Probably so old that they didn't recognise that they didn't support it anymore so they let it work.

Stuck in a never ending cycle of file copying.
 
Thanks guys. Nortel4eva I asked the question cause i needed to know if it was going to work or not before I went onsite and looked like a fool in front of a customer. I was seeing if anyone on here has done it. Okkie Sorry I thought i put V2. Just finished the instal and everything went well. so if anyone else sales team tries to set you up for failure just know this work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top