godslavesmith
Technical User
hello all
can i upgrade my bcm450 ver. 1.0 to 3.0 ??
thanks .....
can i upgrade my bcm450 ver. 1.0 to 3.0 ??
thanks .....
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
upgrading bcm 450
- Thread starter godslavesmith
- Start date
- Status
ianlosborne
Programmer
As far as I am aware you can only upgrade to Rls 5 (or higher)
Rls 3 was only for 50,200,400 systems. In fact I had to upgrade to 3 in order to upgrade to 5 as there was no direct migration path from 1 to 5.
I have just completed the exercise for some of our systems. Noting that there is little benefit to rls 5 apart from Unified Messaging improved functionality in my opinion. A Rls 1 system with the latest patches will work just as well.
Rls 3 was only for 50,200,400 systems. In fact I had to upgrade to 3 in order to upgrade to 5 as there was no direct migration path from 1 to 5.
I have just completed the exercise for some of our systems. Noting that there is little benefit to rls 5 apart from Unified Messaging improved functionality in my opinion. A Rls 1 system with the latest patches will work just as well.
- Thread starter
- #4
godslavesmith
Technical User
thanks alot ...
your assistance is appreciated ..
your assistance is appreciated ..
- Status
Similar threads
- Locked
- Question
- Locked
- Question
