Upgrading a Option 11 to a PRI T1 Currently using Trunks

[mlwing]

Inclosed is a bayface layout. This customer has a Option 11 with release 23.18 software. They are currently using trunks. They want to upgrade their switch to a PRI/T1 for caller ID and DID capabilities. I dont know if they need to upgrade their software, and what additional components they will need to accomplish this. Help!!! Thank You!!

OPTION 11 W/EXPANSION CABINET W/23.18 SOFTWARE

BAYFACE LAYOUT SHELF 0
POWER SUPPLY RLS 19
SSC RLS 4
SDI/DCH RLS 3 (NOT IN USE PULLED OUT OF SLOT BUT IS PRESENT)
OPEN SLOT
1.5 MB DTI/PRI RLS 2
DGTL LC RLS 7
DGTL LC RLS 5
ANLG M/WLC RLS 8
OPS ANLG LC RLS 3
OPS ANLG LC RLS 3
OPS ANLG LC RLS 3
MERIDIAN MAIL


BAYFACE LAYOUT SHELF 1
POWER SUPPLY RLS 19
FBR RCVR RLS 8
UNIV TRK RLS 8
XCMC RLS 2
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
CMCC CONTROLLER RLS 9
OPEN

 

[jimbopalmer]

As a guess, you want a Nortel Meridian Forum, not a Nortel Networking forum.

http://tek-tips.com/threadminder.cfm?pid=798

I tried to remain child-like, all I acheived was childish.

 

[phonefriend]

You will need to upgrade mainly due to ISM paramenters are required for Dchannel to work. (this is a keycode purchase)