I was trying to install 12.3 (from 12.2) on a c2600 and ran into a problem, then created another one. Been a while since I've had to upgrade a router, I think 11.3 was the last time. I uploaded the new .bin file to flash alright (had room to leave 12.2 there), then entered config mode, then "boot system <filename>" wrote the config and reloaded the router. It still booted on 12.2. Thinking maybe the file was corrupt I deleted it so I could upload it again, no room. The file is marked deleted but is still there, "Squeeze flash:" gives me and error that I need to erase the whole flash to create a squeeze log (?).
First, I thought there was a "sho boot" command so I could see it what ios it was going to use and secondly anyone know a way around erasing the flash ? (I'm remote and know old murphy's law will burn me before I reupload the IOS if I erase the flash.
Thanks
First, I thought there was a "sho boot" command so I could see it what ios it was going to use and secondly anyone know a way around erasing the flash ? (I'm remote and know old murphy's law will burn me before I reupload the IOS if I erase the flash.
Thanks