Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrading 6x16 DR1 to DR5 / 5.1

Status
Not open for further replies.

gm85

Technical User
Aug 2, 2007
141
CA
Hey Everyone,
Last year, we upgraded our Norstar 6x16 to a BCM system. The 6x16 has a DR1 software cartridge (it was installed in 1990, so it had been operatng for 17 years).

As the system is just sitting around, I'd like to make use of it. My first task will be to replace the software cartridge with a DR5 / 5.1

My question is since there is a DS version and a Non-DS version, are there any hardware requirements for using the Disconnect Supervision card, or is it purely within the software?

In other words, would I be able to buy a DR5.1 DS card and have it work with my 6x16 system?

Thanks
 
Ahh okay, so there is a hardware requirement then. Yeah I wasn't expecting that this ksu would be compatible with DS as it is 18 years old heh.

Thanks Guys
 
If the KSU has green writing and the norstar emblem on the outside is Green, then it is a DS cabinet, if it is Gray, then it is a non DS cabinet
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top