Upgrade Partnet ACS 7.0

[rgtrgt]

We have a early verison of the partner 7.0, what is the procedure to upgrade to the latest release. i have the latest pcm card.

 

[tmatulja]

back up progamming to back up card.
turn off power.
put upgrade card in to slot 1
turn on power.
light goes green red.
when it turns solid green back it up.
turn power off.
put backup card and or pc card in and turn on
then back it up to the card

 

[tmatulja]

feature 00 will tell you what release it is. If you have the T patch it will have a B at the end

 

[ttech]

FEATURE 59 WILL GIVE YOU THE RELEASE

 

[1043]

T is latest for R6
K is latest for R7

 

[possum61]

Was just at a old one 3.1 Feature 59 does not work. Guess just on 7 release

 

[1043]

Feature 59 only works on an ACS. It was probably a Partner II or Partner Plus

 

[possum61]

You are right sir it was a PLUS

 

[bobbyspice]

Here is a link to determining all versions Partner, Partner Plus, PartnerII, Partner ACS.

http://support.avaya.com/japple/css...tID=107600&temp.bucketID=108020&PAGE=Document

Also previous thread Thread668-1384014 shows what ACS R6 and R7 display after R7J or R6T patch


Bob