Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrade Issue

Status
Not open for further replies.

GSmitherman

Programmer
Oct 24, 2003
225
US
After upgrading a 406 to 3.1.65 any 44xx series phone is having issues. Any button programmed as an autodial to a user will not work. If you unplug the 44xx series and replace with a 54xx series, the button works. Has anyone ran into this.
There were no issues during the upgrade. I have upgraded several units and never had this issue.
 
What does your button programming look like?

I'm using a 4412 on ver 3.2 and user buttons are working...but i don't recall having a problem like this on 3.1

Action: User
Action Data: "Extn316"

You might want to try deleting the entire user and recreating them...i've had some weird problems that were fixed by doing that. Also check for extra spaces in the users name or in the 44xx user's button programming.
 
The question is why would you be upgrading to 3.1.65 instead of 3.2.54?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top