Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrade from 5.x to 7.x licenses needed?

Status
Not open for further replies.

VoIPP

MIS
Jan 28, 2009
555
0
0
US
To get from 5 to 7 to I need

6.0, 6.1 and 7.0? Or just the major releases: 6.0, 7.0?
 
Just software upgrade 4 which gets you 7.0

Kyle Holladay
ACSS & APSS SME Communications
MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA

"I have one speed, I have one gear...GO!!!" - Charlie Sheen

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
 
it depends on youre hardware!

Off course you need an upgrade license!
 
Two units to upgrade, both are IPO500 V1.

Both have under 32 users.

They both have 20 VCM licenses. If I remember correctly that will convert to 60 IP EndPoints?

I am unfamiliar with the term "software upgrade 4", is that just another name for "IP Office Upgrade 7.0"?
 
They are called "IPO LIC UPG R6.0" or what ever version you need.
Manager will show "Software uograde 2" for 6.0 and "Software upgrade 3" for 6.1 and so on and on.



BAZINGA!

I'm not insane, my mother had me tested!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top