Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
upgrade CCM 4.1 to version 8 - help? 1
- Thread starter Prizmm
- Start date
-
1
- #2
Summarized here are the steps:
Install and run DMA on the 4.1 pub.
Install the new 8.0 image and when it asks you for the DMA file (which is the backup file) run it and it will restore the db to the new cluster.
Built your subscriber and test.
Here is a link with all the docs you will need:
There is no single doc that describes all of it in detail.
If you have not done this before I highly suggest you get some help from someone who has.
Install and run DMA on the 4.1 pub.
Install the new 8.0 image and when it asks you for the DMA file (which is the backup file) run it and it will restore the db to the new cluster.
Built your subscriber and test.
Here is a link with all the docs you will need:
There is no single doc that describes all of it in detail.
If you have not done this before I highly suggest you get some help from someone who has.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question