Unity Ports won't register with Call Manager

[myarberry]

Please advise can not get Unity Ports to register with call manager any advice would be appericated.

 

[jm9776]

Myarberry,

Is this a new intregration with unity or has the system been up and running and now the ports are unregistered. If this is a new setup then verify that the port names are configured the same way as in unity. Also from unity make sure that you can reach callmanager. I ran into a similar problem before and found that the ports where not called the same in callmanager and unity.

Thanks,

 

[ptdog]

I had the same problem with Unity. It was not a new integration. Half of my ports lost registration and resetting them would not register them. A reboot of Unity fixed the problem.