The information I have indicates that the BCM works with the APC UPSs over the console port. I believe it sends messages to the UPS to get status and to receive any problems. We have some ONEAC UPSs that will work with NT getting voltage signals over the DB-25 connector. Will this work with the BCM and its NT implementation or is an APC UPS required to be used on the BCM.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Uninterruptable Power Supply for BCM 1
- Thread starter ilarrya
- Start date
- Status
Similar threads
- Question
- Locked
- Question