Unify Openscape 4000 V10 R1.34 or V10 R1.42 - Problem with Access Code Forward

[Itusdo]

Hi everyone,
i have installed openscape 4000 V10 R1.34 or V10 R1.42
I created the access code forward whith AMO WABE:
ADD-WABE:*4,,,AFWDEXIN,N,,,,,,,,; //active
ADD-WABE:#4,,,DFWDVCE,N,,,,,,,,; //deactive
But it can't be used on both analog, HFA, and SIP phones.(press *4 on phone to Set forward).
I tried creating forward with ZIEL and it can forward fine.
Has anyone encountered this, please tell me why?

With AMO FEASU that I changed:
CHA-FEASU:A,CRITM&LDME&SPDC&SPDI&HTVCE&HTFAX;
CHA-FEASU:A,HTDTE&OVR&FRKN&NIGHT&COSXCD&COSXKEY;
CHA-FEASU:A,DCOSX&COSXATND&COSXT&COSXDP&ICPTDID&HOTRCL;
CHA-FEASU:A,DND&VARCONF&TRACE&SNR&RKNOVR&CBK;
CHA-FEASU:A,DSS&SPLIT&ONHKTRNS&PU&RSVCO&SER;
CHA-FEASU:A,DDTES&ISTR&RNG&NOCHRG&TRACCO&LEDSIGN;
CHA-FEASU:A,VMSDP&AUTOV&EMOVR&EMRLS&SYNCANN&CDRINH;
CHA-FEASU:A,CDRIC&CDROGNW&CDROGTR&DISCHINH&DISCHNW&DISCHTR;
CHA-FEASU:A,LCRET&POSTBUSY&POSTFREE&RELOCATE&VOICO&HTNW;
CHA-FEASU:A,PININT&TIMEDREM&ATTR&CPS&INCPRIO&XFBACALL;
CHA-FEASU:A,CALOGOPT&DIRCPCKP&DCPA&CDRACC&CLIP&MOBHFA;
CHA-FEASU,WTATND&RELCON&RERING&DCBB&DCBNOA&PINNW;
CHA-FEASU,ECFW&XFBADIAL&CDRE&NCT&RCCB&MLPP;
CHA-FEASU,SMARTCRD&SILMON;

 

[adibv]

ECFW must be activated in FEASU.
Make sure the target route used for the source group is not marked as emergency route (EMCYRTT = NO) in RICHT.

https://www.tek-tips.com/viewthread.cfm?qid=1796033

 

[Moriendi]

AFWDEXIN code works for me without ECFW in FEASU. The Edoku description for that feature does not seem relevant for dialling that code.

 

[Itusdo]

Hi Adibv,
Thanks you for your support, but for AFWDEXIN code we don't need to activate it in FEASU.

Hi Moriendi,
I agree with you.

 

[sbcsu]

I think you might mean
*4 destination then # to setup ?
example
*41234# hang up

 

[gbwsdownload]

Thanks for sharing.