Unicam connectors vs. hot melts/epoxy 1

[rsweber]

I have see eariler discussion concerning Unicams and Hot
melts and am wondering if there are any white papers on
this issue. I have a contractor who installed the Unicams
in a coal fired power plant which I don't agree is the
correct environment for its use. Any thoughts?

 

[rsmadhava]

If the connector is exposed to hot environment, I would recommend 3M Ultra High Temp Hotmelt connectors. These are designed to work upto 100 deg C.

 

[rsweber]

Thank you ramadhava.

 

[glister]

I have installed Corning CamLock connectors in an industrial manufacturing facility in West Texas with no problems.

A+,N+,S+,L+,I+,HTI+,e-Biz+,CETsr,CST,CNST,CNCT,CFOT,CCNT,CCTT,ACSP,ISA CCST3