Unhandled Access Violation;reading 0Xffffffff exception at 671e32c9h

[tqlashot]

This flag came up after reloading AutoCad 2000,(as a result of getting multiple other ERROR messages). I have replaced the .dwt that I use and the company title block in case they were carrying the problem. Evidently, the problem exist somewhere else on the hard-drive. Please forward any information that my help. I REALLY don't want to re-formatt my hard-drive if it can be avoided.
Thank You.

 

[vwluvrs]

I'm receiving the same errors repeatedly, to the point I am re-booting or re-starting acad more than I am working. Very frustrating!
"Fatal Error: Unhandled access violation reading 0Xffff??? @ 517023h or 65536930h

 

[Peth]

Some errors are similars to this, it´s probably that the file are corrupted...

read this..

Fatal Error: Unhandled Access Violation Reading Exception at 5f4fe41h
Read the Disclaimer
Print
ID: TS29596
Applies to: AutoCAD® 2000,
AutoCAD® 2000i

Published Date: 01/31/2001


Issue
You start a new drawing or use the Layout wizard, and one of these error messages display:

Windows 95 and 98 Error:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at 5f4fe41h
Window NT 4.0 or 2000 Error:
Fatal Error: Unhandled Access Violation Reading 0x0002 Exception at 5f41fe41h
Other commands such as OPTIONS, MENULOAD, PLOT, PAGESETUP, XREF, SPELL, STYLE, LWEIGHT, LAYER, and RENAME, may not work, or may also display the same error.

A prompt to save your drawing is not always displayed when one of these errors occur.



Solution
These errors occur if the ARX files for the BLOCK/BMAKE command or the FIND command are loaded manually through the APPLOAD dialog box.

The ARX files include:

BLOCK/BMAKE - acblock.arx
FIND - textfind.arx
Do not use the APPLOAD command to load any ARX files that are demand loaded by the software program.

If you have manually loaded any of the above ARX files (or other ARX files that are demand loaded) save the drawing, exit the software, and then restart the software.
2)

Issue
The following error message is displayed when you open a drwaing or switch from a layout to model space:

Unhandled Access Violation reading 0X0008 Exception at 334032F4h



Solution
This error is an indication of drawing corruption. Try one of the following methods to resolve the issue:

Use the DDINSERT command to insert the problem drawing into another drawing, and then save to a new drawing
Use the WBLOCK command on the problem drawing and then use the RECOVER command to repair the drawing.
Save the problem drawing as a DXF™ file, and then bring back into AutoCAD and save the drawing as a DWG file.

try look into the Softdesk site

Pedro Treviño
best regards