IP500 8.0(18)
When a call comes in and the CID is presented we are able to press transfer, dial 9 then an off switch number and transfer the call without issue.
However if a call comes in marked "Anonymous" (thru dialing *67 or carrier blocking) and we try to transfer it we get a call rejected message. I'm guessing I need to modify either a dial code or a SIP URI, Let me know if you need further info
!
I've ran the Monitor and captured the following bit of data
10.1.1.114 is the IP500
3809090 is my cell
207.5.178.218 is the SBC
69.39.99.162 is our Wan address
SIP Call Tx: 18
INVITE sip:3809090@207.5.178.218 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.114:5060;rport;branch=z9hG4bK08868fd666ad43a735331703d2a07d52
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=9269e2d52affd236
To: <sip:3809090@207.5.178.218>
Call-ID: 2c7463b69f825886c34b623565c2be5b@10.1.1.114
CSeq: 1998476601 INVITE
Contact: <sip:anonymous@10.1.1.114:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Content-Type: application/sdp
Supported: timer
Privacy: id
P-Preferred-Identity: "Unavailable" <sip:8665516377@207.5.178.214:5060>
SIP Rx: UDP 207.5.178.214:5060 -> 10.1.1.114:5060
SIP/2.0 403 From: URI not recognized
Via: SIP/2.0/UDP 10.1.1.114:5060;received=69.39.99.162;branch=z9hG4bK08868fd666ad43a735331703d2a07d52;rport=5060
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=9269e2d52affd236
To: <sip:3809090@207.5.178.218>;tag=SD6ig1699-callagent.gwi.net+1+0+e65575fd
Call-ID: 2c7463b69f825886c34b623565c2be5b@10.1.1.114
CSeq: 1998476601 INVITE
Server: DC-SIP/2.0
Organization: MetaSwitch
Content-Length: 0
When a call comes in and the CID is presented we are able to press transfer, dial 9 then an off switch number and transfer the call without issue.
However if a call comes in marked "Anonymous" (thru dialing *67 or carrier blocking) and we try to transfer it we get a call rejected message. I'm guessing I need to modify either a dial code or a SIP URI, Let me know if you need further info
I've ran the Monitor and captured the following bit of data
10.1.1.114 is the IP500
3809090 is my cell
207.5.178.218 is the SBC
69.39.99.162 is our Wan address
SIP Call Tx: 18
INVITE sip:3809090@207.5.178.218 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.114:5060;rport;branch=z9hG4bK08868fd666ad43a735331703d2a07d52
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=9269e2d52affd236
To: <sip:3809090@207.5.178.218>
Call-ID: 2c7463b69f825886c34b623565c2be5b@10.1.1.114
CSeq: 1998476601 INVITE
Contact: <sip:anonymous@10.1.1.114:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Content-Type: application/sdp
Supported: timer
Privacy: id
P-Preferred-Identity: "Unavailable" <sip:8665516377@207.5.178.214:5060>
SIP Rx: UDP 207.5.178.214:5060 -> 10.1.1.114:5060
SIP/2.0 403 From: URI not recognized
Via: SIP/2.0/UDP 10.1.1.114:5060;received=69.39.99.162;branch=z9hG4bK08868fd666ad43a735331703d2a07d52;rport=5060
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=9269e2d52affd236
To: <sip:3809090@207.5.178.218>;tag=SD6ig1699-callagent.gwi.net+1+0+e65575fd
Call-ID: 2c7463b69f825886c34b623565c2be5b@10.1.1.114
CSeq: 1998476601 INVITE
Server: DC-SIP/2.0
Organization: MetaSwitch
Content-Length: 0