I have clients using Cisco VPN client and accessing the network through a Cisco 506E Pix. They are able to ping all server and workstations and access other LAN resources except for being able to Telnet to a cisco router and a switch after establshing a VPN connection. I can Telnet to the same router with no problems from inside the LAN. Is this a access list issue on router or should some statement be put on the pix? I have split tunneling enable to for the VPN Local pool. Any help would be appriciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unable to Telnet after VPN
- Thread starter daidem77
- Start date
NetworkGhost
IS-IT--Management
Are they all on the same subnet?
NetworkGhost
IS-IT--Management
Post your config. That would be useful.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
