Unable to set up Mitel SIP Trunk

[vsha85]

Hi I M New with Mitel. I tried to set up SIP Trunk with my Service Provider but I am getting OUT OF Service when i tried to call outside.

Also when i used command SIP LINK STATE ALL I got this error.
There are 1 SIP link(s) programmed.
Link MYNETFONE state is IN SERVICE (link down count 0) - REGISTER Failed


Any Guess..

Thanks in Advance

 

[wireman50]

Its not registering with the SIP provider. Either you have missedout/incorrectly programmed or a firewall is probably getting in the way. NAT can also bugger it up unless there is a STUN server you can use. Routers with SIP awareness can also cause real problems.......etc.

 

[LoopyLou]

Maybe if you said the name of the SIP provider and gave more details in how it is set up people could help you out.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[kwbMitel]

Have you been using help docs for Sip setup / provider



**********************************************
What's most important is that you realise ... There is no spoon.

 

[vsha85]

Hi Guys,

Thanks for your time and reply.Hope you had a good weekend. About my problem, Sorry I missed out before.. I am able to make a connection using my soft-phone and i even tried today but its coming as out of service now. may be i have changed something in this .. Here the details are.. Oh.. By the way I found one document online for configuration for SIP trunk.. so i just simply followed those steps... may i m still missing something..

In Network Element--

Name-- MyNETFONE
type -- other
FQDN or IP Address

http://www.sip01.mynetfone.com.au

zone -- 1
Sip Peer -- check in
sip peer specific --
sip peer transport-- UDP
sip peer port -- 5060
external sip proxy FQDN or IP address --

http://www.sip01.mynetfone.com.au

In SIP PEER Profile--

SIP Peer Profile Lable-- SIPPROF
Network Element -- MYNETFONE
Registration UserName --- Blank
IP Address 192.168.120.2 (MY Controller IP )
Interconnect Rest -- 1
Max Simlt. Call -- 2
Trunk Service -- 3
Zone -- 1
Auth. Options

Username --- ******* ( I enter my username and password which i got from ISP . I don't know should i enter my username here or leave it blank because i enter the same information in subscription coloumn)
Password -- ********
Subscription Username and Password -- Same as above

Rest of the fields are default in SIP Peer Profile

SIP Peer Profile Assignment by Incoming DID--- 03****7744 - 03****7799 ( I used this range because my internal phone range is 7700 -7790)

In COS for turnks and Device i enable (Public Network via DPNSS) for both ..

If you need any other info.. Please reply me .. Again I really appreciate you time and reply...


Regards

Vsha

 

[vsha85]

Hi All,

I really appreciate if someone have a look on my SIP configuration. I am struggling to connect my sip trunks with my SIP Provider. Any Guess if i am missing something or if i have done anything wrong..

Thanks in Advance..

Vsha

 

[wireman50]

Well, you have no registration user name for a start and you will probably need it. Also a password. Did you SIP providor give you details to enter?