Unable to map network drives over VPN

[DaH00Psta]

Hey all...
Any help with this one would be great...
I can't seem to get this to work...

Remote clients can authenticate to the VPN server, but are unable to map network drives once they're in.
Can't map with names or IPs, when I try to ping servers on the network it fails, except for one...the RRAS ppp/slip generated IP for the vpn server.
The clients are assigned IPs from a pool and all systems are on the same subnet. I even tried putting the vpn server in the DMZ and still the same results...any ideas or suggestions?

 

[ChicagoTechNet]

make sure to enable IP routing on the VPN server.

Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ms-mvps.com

 

[DaH00Psta]

IP routing is enabled on RRAS
Even made sure Netbios is forwarded at the router, but still no luck...
This shouldn't be so hard?!

 

[bcastner]

Either enable the use of the remote network gateway, or implement if possible WINS, or use LMHOSTS.

 

[Mighty]

Did you manage to get this problem sorted as I am having the same trouble.

Mighty