Unable to logon cisco 2620 Router 1

[kam72]

I have configured cisco 2620 router through hyperterminal at the time of configuring i put the password "cisco".

Today i have installed Cisco Configmaker. There is one option called Autodetect device wizard in Cisco config maker. I have clicked on that option and its automatically configured the device.

When i try to logon through hyperterminal as usual it asked me to enter the password when i put the password "cisco" its not accepting.

Then i logon to cisco configmaker and typed "cisco" its not accepting.

I have not changed the password at all. Can anyone advice what to do or how do i reset the password.

Thanks

 

[KiscoKid]

Hi

The password recovery process is well-documented on Cisco's website. I've found a link for you that explains in detail how to reset the password on a 2600.

http://www.cisco.com/en/US/products...ducts_password_recovery09186a0080094675.shtml

Let us know how you get on.

 

[kam72]

Thanks for the help

My problem solved. Once again thank you.

Have a good weekend