I am using a fully patched 12.5 version of BE. At one point I was able to select the admin shares on my two remote 2008 terminal servers. The backups started failing with error: e00084af - "The directory of file was not found or could not be accessed." In the selection list area under the terminal servers name it does show a share that I have on the servers. Any help would be much appreciated. Thnkz
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unable to expand / select admin shares on my terminal servers
- Thread starter srb33
- Start date
- Thread starter
- #3
Jamie,
Thanks for the post. I resolved this issue, by uninstallin beremote, rebooting and then coping over the RAW32 and running setupaa.cmd from a command prompt. This allowed me to see all the admin shares and the system states on the remote servers in question. Thanks again,
Steve Baker
Thanks for the post. I resolved this issue, by uninstallin beremote, rebooting and then coping over the RAW32 and running setupaa.cmd from a command prompt. This allowed me to see all the admin shares and the system states on the remote servers in question. Thanks again,
Steve Baker
- Status
Similar threads
- Locked
- Question