Unable to Attach to Drive ...... 1

[boothy]

Could someone please help or point me in the right direction with the error that I get with Veritas.

Veritas Ver 9 (4367)

The above error occurs when I de-select a server from the backup schedule. The backup runs and produces the error, on checking the configuration of the backup again the server is re-selected??

This isn't the first time this has occured, everytime a server is removed from the network and then removed from the backup schedule the error appears, and unable to de-select from backup.

The only way around this problem at the moment is to create another job and delete the original.

Any help would be appreciated.

Many Thanks

Phil

 

[NortonES2]

Are you de-selecting the server using the Graphical view format? If so select Text view and try deleting it.

-------------------------------

If it doesn't leak oil it must be empty!!

 

[boothy]

Thanks that was what I was looking for. All tested and working. Many Thanks again.

 

[BrianH1]

I was getting "Unable to attach to H:." after a colleage deleted a redundunt drive. I recreated the job, but still failed each night. Just read NortonES2's post and checked the text view; the H: drive was still there, so deleted. Thanks NortonES2....