Unable to add LAN Cards IP HiPath 4000 V1

[Jerenk]

I was changing my system hard disk due to age factor. After reinstall the Unix, I unable to add LAN Cards IP.
I enter the IP, submask, gateway according to my previous setting but nothing happen after I click add. Already reinstall the Unix 2 times but still not working.

 

[sbcsu]

You need to complete the 'Client Preparation' beforehand for the Java to function correctly.
Have you done that first?

 

[Jerenk]

Thanks for the reply. Yes. I have done client preparation before I login as 'engr', but still not working. Just like I mention before, I also tried to reinstall unix but it come to dead end.

 

[sbcsu]

It may already have 'old' values setup.
There is a way of checking/changing via Comwin

STA-UW7;
username
password

If it asks for terminal type set it to ANSI
If it says you have mail just ignore for now

./opt/pal/bin/ppp

1

Follow the prompts/information there

Good Luck / Let me know how you get on.

 

[sbcsu]

Oh yeah,
when you are finished working at Cominw on the UW7
just type 'exit' at the * prompt to leave

 

[Jerenk]

A little update to the situation. After I change the card, everything working. My system not only have harddisk problem also the card. Thanks for the feedback.