Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UDP Port Ranges

Status
Not open for further replies.
btrain8

btrain8

IS-IT--Management
Feb 24, 2005
405
US
I need to increase my range of UDP ports in my network region 1. Can I do that during the day.. is it service affecting?
 
Sort by date Sort by votes
You can change it whenever but the info in the NR only gets downloaded to the phone on registration. So, you'll have to re-register the phones.
 
Upvote 0 Downvote
there were no IP phones associated with doing this. It's a Medpro in a G650 on different floor than my main cabinet so that g650 only serves about 40 users with only digital phones. The BP screwed up and didn't set the channels in software to be 320.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Samfiller
  • Locked
  • Question
Avaya Definity Platform Port Pin outs
Replies
3
Views
165
AvayaTier3
AvayaTier3
ITHawkDriver
  • Locked
  • Question
G450 Services port lit up, but not responding
Replies
4
Views
336
ITHawkDriver
ITHawkDriver
Tre0307
  • Locked
  • Question
How many Port Networks here?
Replies
2
Views
177
dialtonebone
dialtonebone
Richard_Harrow
  • Locked
  • Question
How do I know which port is which in a G650 Media Gateway cabinet?
Replies
4
Views
209
AvayaTier3
AvayaTier3
schmitzfl
  • Locked
  • Question
Disabling an analog port on a G430 Gateway (CM)
Replies
2
Views
143
AvayaTier3
AvayaTier3

Part and Inventory Search

Sponsor

Back
Top