We have a UCx250 that suddenly has blocked any access attempts to the web portal. We did a network reset via the front panel back to the default IP. We can ping the IP address (as we could the old address prior to the reset) but cannot log into the system with any of the browsers we have tried. Any suggestions as to how we might gain access or reset the web portal? Perhaps via a linux command(s). Unfortunately, this customer did not renew their Software Support license, so the manufacturer tech support is reluctant to help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UCx250 web access
- Thread starter koalaman
- Start date
curlycord
Programmer
I am guessing the latter as well, you need to give the exact error you are seeing on the webpage, it also helps to know what browser you are using or others you have tried and if up to date or not.
If it's a TLS issue try looking at this thread: https://www.tek-tips.com/threads/google-protocol.1814020/#post-7519425
If it's a TLS issue try looking at this thread: https://www.tek-tips.com/threads/google-protocol.1814020/#post-7519425
- Thread starter
- #4
- Thread starter
- #5
The most likely reason is that the IP address from which you were trying to access the system was blocked. That can happen for example when someone repeatedly tries to login using the wrong password. You can go to Security - IP Block List to see the list of blocked addresses. You could consider configuring the system to never block addresses on your LAN.
