Ucp and konftel

[Harry0077]

Thanks guys for helping with previous question,
Can some help me with the Konftel 300IP and UCP 100 system.
I did try to connect the konftel with UCP 100 Konftel won’t get registered on network

 

[eddiebullman]

Hi

Have you tried putting the mac address in pgm235

and you have put the login details in pgm443

you could also put the mac address in pgm442

i am using an Konftel300Wx on the system that i am working on at the moment but it is registering direct to the iPECS D130 IP Dect base and shows up as just an IP DECT extension

Eddie

 

[Harry0077]

Thanks edsiebullman for reply, i did try the same can you please contact me on my email regarding this. That should be really appreciated.
harvindersing@hotmail.com

 

[martinhodge]

you have got the 3rd party sip license for it yes . ?

 

[Harry0077]

Not actually.how to do that

 

[martinhodge]

you need to send your lock key off to your local reseller or distributor and buy a 3rd party sip license for the system .


this will allow you to connect non LG sip devices to the system .

you can enable your temp license to get it working instantly for now . but be aware this only lasts for a month . and you only get 6 attempts at that.

 

[Harry0077]

Hi martin, yes I already activated the temp license. However didn’t know how to configure konftel with ipecs.
Can you please help me with that

Thanks

 

[martinhodge]

simply sett the password and user name in the ipecs .

then login to the confitel gui . via its ip and set the sip server as the internal address of the phone system and set the same user name and password as you have set on the ipecs

 

[Harry0077]

Thanks alot martin, can you please contact me through my Email:- harvindersingh89@hotmail.com

I did try I didn’t get through. If you have any documentation can you please send me through or can you please guide me step by step. TIA