Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCM and One-X Mobile Preferred? 2

Status
Not open for further replies.

SupportDude

Technical User
Mar 1, 2006
1,667
US
Documented as supported ....
· one-X Portal for IP Office User Packages are supported. User Packages and Mobility will require user
package licenses. The UC module will support up to 50 User Packages.

Anybody tried it?

Anybody found any documentation specific to configuration/implementation of One-X Mobility on UCM?

-SD-
 
When you go to support.avaya.com and select download and documents you can set 'view documents' instead of 'view downloads'. It's on the top right under choose release.
The product is called an IP Office Application Module in regard to Avaya documentation, not UC110 as you may be looking for.

page 1 for UC110 installl
Page 42 for One X configuration.


Inter.bmp


Kids, Kids, It's Avaya. You're both right.
 
I tried it and it worked fine.


BAZINGA!

I'm not insane, my mother had me tested!

 
Peter I sent him a link for the apps server module, not Unified Communications module.

Supportdude the manual is on support.avaya.com

Inter.bmp


Kids, Kids, It's Avaya. You're both right.
 
It does not matter, it all works the same way.

BAZINGA!

I'm not insane, my mother had me tested!

 
My thoughts on foreign women...

Inter.bmp


Kids, Kids, It's Avaya. You're both right.
 
They are all the same in the end.
Only the appearance is different :)

BAZINGA!

I'm not insane, my mother had me tested!

 
Thanks for the responses gents!

I was specifically wondering about the lack of the IM/Presence XMPP Domain Name field in the UCM.
Did you just use the Host name field to configure the FQDN?




-SD-
 
Yes, works fine. Input your FQDN into the IM/Presence tab, and all is well. If not using the Mobility or FQDN, you can just put the IP of the 1xP in there instead. I have found that sometimes, the 127.0.0.1 doesnt work.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top