Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCA 2.0 client send Certificate request failed

Status
Not open for further replies.

mitelfang

Technical User
Oct 21, 2009
29
US
UCA 2.0 client send Certificate request failed
I can send Certificate request to LAN IP address,and can send it to another teleworker server.
But when i send Certificate request to my custom server ?UCA client always promote me failed.
 
Do you see the request appearing the the teleworker server so you can approve it?
 
i check the port?port 80 isn't open.
i wondering this is MSL setting or network problems?
 
If you describe your firewall/DMZ scenario people should be able to help
 
How is the Teleworker installed on your network? Single NIC, Dual NIC, in the DMZ?
 
I can send Certificate request to LAN IP address,and can send it to another teleworker server.
But when i send Certificate request to my custom server ?UCA client always promote me failed.


The request should be sent to the WAN or external, routebale IP address not the LAN address.
 
hi LoopyLou
i konw that.
follow boycey9 's advise,i found port 80 isn't open.
i think it is network problem,and i will ask custom to check it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top