Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UC Module 9.0.5 working but no http access

Status
Not open for further replies.

d00ner62

Technical User
Nov 15, 2011
238
CA
Hello

I have upgraded my UC module from 8.0 to 9.0.5 using the usb method with a 9.0.5 image on it

The ip office can see the uc module
voicemail is running
I can turn the UC Module on and off with system status
I can Win SCP into the UC Module
I can SSH into the UC module

I CANNOT GET IN WITH WHAaaaaaaaattttttttt!!!!!!!!!!!???????????
 
Try to log in into http(s)://<IP>:7071 and look if WebManagement Service is startet and set to start on boot.
 
Cant access that address either. Isn't that the web management? So if it was off, wouldn't I be unable to access it?
 
What do you mean by "can't get in" - what appears (if anything) at the address you are trying or is it not accepting the name/password you are using.

btw: https is the 9.0 default.

Stuck in a never ending cycle of file copying.
 
Page not found

I've tried http:// as well
 
Do you have "Avaya HTTP Clients Only" un-checked?
Systems tab top third of page.....
 
I mean ipaddress of the IPO instead of the UCM.
This will lead you to a webpage where you can select the webmanagent page of the UCM :)

BAZINGA!

I'm not insane, my mother had me tested!

 
Avaya HTTP Clients" is unchecked and always was


Going to the ipoffice ip address gives me 4 options:

-IP Office Web Manager(went through every option in here and cant see "UCM Web Management"
-System Status
-Knowledge Base
-Avaya Support
 
Then I am probably mistaken and it is a 9.1 option.
Try login to the CLI and restart the web service from there.

BAZINGA!

I'm not insane, my mother had me tested!

 
The only 3 applications I can start are

One portal
voicemail pro
management service

Tried the third one and it didn't solve anything
 
Then I suggest to reinstall it.
Don't do an upgrade.
Make backups of the working applications.

BAZINGA!

I'm not insane, my mother had me tested!

 
It's ManagementService... You can first try to get the service status.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top