Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UC Express softphone

Status
Not open for further replies.

Mitelpassion

IS-IT--Management
May 2, 2005
1,153
ZA
does UC express softphone have something like a keypad so one can enter dtmf tones to guide through an IVR of sorts?

I've checked but can't find it.
Thanks
 
Not sure about UC Express but using UCA when you go off hook there is matrix like symbol below a clock like symbol on the right hand side of the box.
If you click this it should open up the dial pad and then you should be able to send DTMF tones.

Share what you know - Learn what you don't
 
UCA covered, thanks
am asking specifically UC express, way different interface ;)

Tnx
 
UCE doesn't have a keypad only a section to enter the digits you can use FAC e.g. *60 oo #60 but as far as I'm aware you cannot interact with an IVR only prentered digits then press the call button.



Burningchrome

Tell me what you need and I'll tell you how to get along without it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top