Two Identical Network Adapters?

[dxd]

Is it possible to disable or enable only one of the adapters per profile?<br>
<br>
For instance two Intel Pro 100+ adapters. They both use the same driver and I am looking for a way to only have one enabled per profile.<br>
<br>
Any suggestiones would be appreciated.<br>
<br>
<br>
dxd

 

[sijones]

You would have to give the hardware address for the one you want enabled,<br>
<br>
well you would have to know both hardware addresses for the cards, then you should beable to enable one and not the other.<br>
<br>
In your network adapters you have two cards?<br>
<br>
just clone your profile twice, then delete one card for one profile and then delete the other card for your other profile. I think you should beable to do it like that. <p>Simon Jones<br><a href=mailto:sijones_uk@yahoo.com>sijones_uk@yahoo.com</a><br><a href=

http://www.theallandale.co.uk>The

Allandale Youth Works</a><br><b>God</b> am good!!! and good lookin

 

[dxd]

Network properties, such as bindings, protocols, services, or installed network adapters are not specific to a hardware profile. If one item is removed or deleted from a profile it will be removed from all profiles.<br>
<br>
Since the driver is the same for both adapters you can not disable it per profile.