Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Two extentions for the same phone.

Status
Not open for further replies.

Jacky2000

Technical User
Sep 26, 2014
4
DE
I am in a small agency with Hipath 3800 pbx and OpenStage 10T phones (non IP).

One of the phones (# 100) is so configured that when the call is not answered, it is forwarded to the secretary (#110).

Would it be possible to attach or forward to this same phone (#100) a secondary number (#200), but in the way that it remains private (i.e. never diverts to the secretary phone)?
This means :
When #100 is called and not answered, it is transferred to the secretary (this works fine already)
When #200 is called and not answered, it is lost.

Many thanks for any suggestion.
Jacques
 
Hi Jacques,
I would
- create groups in "Incoming calls" - "Groups/Hunt Groups"
- change 100 to 101
- create a hunt group linear 100 with members 101 and 110 and another group 200 with member 101 only







 
if you set up forward table for 200(say table 2) and have first target as * and second target is 100 it will ring 200 then 100, this will not go to 110 because it is following a different table
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top