Two DN ring on different phones

[Hyder1988]

Hello all,

I have searched for site for solution but cannot seem to find one. Here is my question....

I have 911 set up analog, I have two digital phone that when 911 is dialed that pick up the line. the two phones are in different buildings. when phone A picks up Phone B stops ringing.

So is their a feature set that will allow me to set it up so that when PHONE A picks ups up, PHONE B will keep ringing until it is picked up and then will join the converstation..

Thank you as always.

 

[tgolds]

Change the key from SCR to MCR.

 

[Hyder1988]

on one or both sets??

 

[tgolds]

On both, you can not mix SCR's with MCR's.

 

[KCFLHRC]

MCR will not allow a second person to join the conversation.

 

[tgolds]

What about if you put POA in the CLS? OR is this only for SCR not MCR. IF so use SCR with a rollover and put POA in the CLS on both sets.

 

[Hyder1988]

Yup just found that MCR will not let the other person joing the conversation... Any other suggestions so that the Phone B will still ring after Phone A has picked up?? Is there another feature that I am missing I keep gettting a SCH0707 error...

Thank you

 

[Hyder1988]

What about if you put POA in the CLS? OR is this only for SCR not MCR. IF so use SCR with a rollover and put POA in the CLS on both sets.

I will try this really quick...

 

[KCFLHRC]

Nothing you can do to keep the other phone ringing

 

[gwebster]

What about Group Call? "Activation of a Group Call key originates a call to all assigned members of the group. When the first member of the group answers, ringback tone is removed and a speech path is set up between the member and the originator of the call. As subsequent members answer, they are added to the call.