Two different software and sytem id's

[scanjet]

My customer bought a cs1000k from a broker and was told that the softwre was as follows. But after firing uo the system we got a different software and different system id.The broker says it is correct and will work fine. The actual software and system id are different and seem like it is fo a much bigger system than an option 11 cabinet will work with.

Original
Software Release & Issue 04.50w
Security ID 10294503
Auxilary ID 10294503
SUB TYPE Meridian 1 Cabinet
MODEL Cabinet
FEATURE SET NTSK01GC Premium Network Service
s
Packages 0-2,4,5,7-14,16-21,23-29,32-56,58-64,67,70
-77,79-81,83,86-93,95,98-103,105,107-111,113-121,125,12
7,129,132,133,139-141,145-155,157-164,167,170,172-175,1
78-181,183-186,191,192,200,202-210,212,214-216,218,219,
222-225,229,233-235,240,242,243,245-247,249-251,253,254
,256,258,259,263,291,295-297,301,305-307,310-312,315,31
6,321,324,327-334,348,350,351,362,364,380-382,384-388,3
93,394,397-401,406,407
Extra Packages 57
REGION NA
TNS Level 2500
ACD DN 300
AST 1
MOPT 0
LTID 0
RAN Connections 0
RAN Routes 500
Music Connections 0
BRAND 2
ACD Agents 10
ANALOGUE TELEPHONES 16
ATTENDANT CONSOLES 2500
BRI DSL 150
CLASS TELEPHONES 0
DATA PORTS 2500
DIGITAL TELEPHONES 88
IP USERS 0
BASIC IP USERS 0
PHANTOM PORTS 2500
DECT USERS 0
DECT VISITORS 0
TRADITIONAL TRUNKS 2500
ITG ISDN TRUNKS 0
TMDI D-CHANNELS 64
SURVIVABILITY 0
PCA 0
H.323 ACCESS PORTS 0
SIP ACCESS PORTS 0
SIP CONVERGED DESKTOPS 0
SIP CTI TR87 0

VERSION 4021

System type is - Communication Server 1000E/CP PM
CP PM - Pentium M 1.4 GHz

IPMGs Registered: 0
IPMGs Unregistered: 0
IPMGs Configured/unregistered: 0

RELEASE 6
ISSUE 00 R +
IDLE_SET_DISPLAY NORTEL

IPMG TYPE CSP/SW MSP APP FPGA BOOT DBL1 DBL2

___________________________________________________________________________________________________________________________

Actual

REQ TID

TAPE ID:
LOADED 318831352


REQ slt

System type is - Communication Server 1000E/CP PM
CP PM - Pentium M 1.4 GHz

IPMGs Registered: 0
IPMGs Unregistered: 0
IPMGs Configured/unregistered: 0


TRADITIONAL TELEPHONES 144 LEFT 142 USED 2
DECT USERS 0 LEFT 0 USED 0
IP USERS 174 LEFT 174 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 165 LEFT 165 USED 0
MOBILE EXTENSIONS 0 LEFT 0 USED 0
TELEPHONY SERVICES 0 LEFT 0 USED 0
CONVERGED MOBILE USERS 0 LEFT 0 USED 0
NORTEL SIP LINES 0 LEFT 0 USED 0
THIRD PARTY SIP LINES 0 LEFT 0 USED 0

PCA 0 LEFT 0 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 254 LEFT 254 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 10 LEFT 10 USED 0
RAN CON 20 LEFT 20 USED 0
MUS CON 4 LEFT 4 USED 0

TNS 32760 LEFT 32758 USED 2
ACDN 24000 LEFT 24000 USED 0
AML 16 LEFT 16 USED 0
IDLE_SET_DISPLAY NORTEL
LTID 32760 LEFT 32760 USED 0
RAN RTE 512 LEFT 512 USED 0
ATTENDANT CONSOLES 32760 LEFT 32760 USED 0
BRI DSL 10000 LEFT 10000 USED 0
DATA PORTS 32760 LEFT 32760 USED 0
PHANTOM PORTS 32760 LEFT 32760 USED 0
TRADITIONAL TRUNKS 32760 LEFT 32760 USED 0
DCH 255 LEFT 255 USED 0




NT Corporate ID : 18110000
NT SDID : 10401539
SDID : 535E700C9618A189
Security Device Type : NT_STD
System Serial Number : 318831352

 

[CollegeFootball]

If I'm not mistaken you will also need a differnet CPPM card as well for 6.0.
I believe it's NTDW99CAE5 but I could be mistaken if it is a necessary item.

 

[KCFLHRC]

The only difference in the CPPM cards, old and new, is the new card has a metal faceplate and better EMI shielding. Other than that, functionally they are the same card.

 

[CollegeFootball]

The 99CAE5 was designed to work with 6.0 and above. I don't think it can be used on anything prior but could be mistaken.
Do you know?

 

[KCFLHRC]

I have an older CPPM card with the plastic faceplate and it is an NTDW61BAE5. I also have a newer one with the metal faceplate and it's an NTDW99AAE5. Not sure I have seen the NTDW99CAE5

 

[scanjet]

Can I set up this system with the cppm card and mgc if I set up the ip's?